Click to enlarge

THE OUTTER CABLE MEASURES about 44" INCLUDING THREADS

THE FREE LENGTH CAN BE ADJUSTED FROM 50MM TO 70MM WITH THE 2 ADJUSTING POINTS

I have found that this is the best universal twist throttle to be used on the two-part handlebars, that have the brake lever perch Welded to the bar. The throttle cable is fairly long so you may have to shorten it. To do so you may need one of the Solder on small brass barrels listed below on this page.

@ SIDE PULL UNIVERSAL THROTTLE ASSY 7/8" BARS 7/18P (AFT209H) AFT209H

Click to enlarge@ LOOKS FINE AND WILL KIND'A SNAP BACK ON THE CT90'S TOO
@ SOLDER_ON_INNER THROTTLE_CABLE 1/20W (END) (359E)@ SOLDER_ON_INNER THROTTLE_CABLE 1/20W (END) (359E)FOR SHORTINING INNER CABLE LENGTHS

OR SHORTING THE OUTER CABLE TOO

END (359E)
@ UNIVERSAL THROTTLE CABLE (TRX90) (XR/CRF50) 1/22C (AFTCB110049) @ UNIVERSAL THROTTLE CABLE (TRX90) (XR/CRF50) 1/22C (AFTCB110049) THIS HAS A 10MM THREADED END TO THE THROTTLE TWIST, OR THUMB THROTTLE HOUSING, WHICH IS THE SAME AS THE TRX90 HAS , THIS CABLE IS ABOUT 3" LONGER THAN A STOCK TRX90 THROTTLE CABLE WITH A LOT LONGER INNER CABLE LENGTH,, YOU WILL NEED TO USE ONE OF OUR "END" NIPPLES AND SHORTEN THE INNER CABLE BY 1 1/4" TO USE WITH AN AFTERMARKET CARB AND THE THUMB CONTROL.

AFT/CB110049
Click to enlarge85" OUTTER CABLE AND SMALL "END" TYPE CABLE*

*

THIS WORKS WITH OUR 209H THROTTLE ASSY

20-8626$17.99